CompeGPS Team S.L.
http://www.compegps.com
http://support.compegps.com
Note
: It is very important that when carrying out the calibration of the compass the device is
horizontal (e.g. sitting on a table) and not close to metallic objects or strong magnetic fields. The
device must be turned slowly and continually to achieve a more accurate calibration.
4.9.8
Folders
In order for your data (maps, waypoints routes and tracks) to be considered by TwoNav when
creating lists in the
‟data‟ section, they have to be inside the folder you have created for this
purpose.
You may define one or more folders for maps (then, the maps of all folders will be included in this
map list) and a folder for data (waypoints, routes and tracks).
The folder for maps by default is „
TwoNavData/maps
‟.
The folder by default for the rest of data (waypoints, routes and tracks) is „
TwoNavData/Data
‟.
If there are any other folders inside the one you have selected, they will also be shown in the data
list.
For example, if we create a folder called „Pyrenees routes‟ inside „TwoNavData/Data‟, and
„TwoNavData/Data‟ is set as the only routes, waypoints and tracks folder, we will have the
following representation in the routes list:
You can configure which folders will be considered. Just go to „menu > settings > system >
folders‟ (
advanced mode
may be enabled) and change the Maps or Data folders.