CompeGPS Team S.L.
http://www.compegps.com
http://support.compegps.com
Search for a less detailed map: it will try to load a map of lower resolution than the
currently loaded.
Next Waypoint: When navigating a route or a track with waypoints, switch to the next
one.
Previous Waypoint: When navigating a route or a track with waypoints, switch to the
previous one.
Note
: NextWPT and Previous WPT tools will only be visible when navigating a route or a track
which contains waypoints.
4.6.12
3D Reliefs
TwoNav may use elevation maps (grid with information on the height of the ground) to have the
altitude data on the references created with the program (e.g. tracks, waypoints, etc.) to
habilitate the visualizing mode
3D+
(3D real).
Besides remaining subjacent and supply the ground altitude data, the 3D relieves may be seen
with the following options:
Draw landscapes on the 2D view:
It will be seen if a CDEM is loaded, although it
will take position in the lowest layer so any other loaded map will be displayed on
top.
Draw landscape with shadow:
This visual option makes the relief drawing more
attractive.
Flat colour steps:
Instead of using a fading colour, just one plain colour for each
height interval will be used. This interval can be preset from the unfolding menu just
below.
4.6.13
3D mode
You may set the following options for 3D mode:
3D mode: Choose the sequence for
button in tools bar:
o
2D-3D+ (if raster map): 2 positions:
2D
3D/3D+: TwoNav will try to show 3D+ mode. If not possible, 3D (flat)
will be shown.
o
2D-3D-3D+: 3 positions:
2D
3D (flat)
3D+
3D+ mode will only be shown if its requirements are met (see
2D/3D/3D+
section)
Altitude exaggeration: Multiplies the altitude of the relief to make a clearer effect in 3D+.
Shading: This option will cause the relief to be displayed in a clearer and attractive way,
as it features shadow simulations enhancing thus the variations of the grounds. This
option is only effective on the 3D+