CompeGPS Team S.L.
http://www.compegps.com
http://support.compegps.com
4.8.7
Next WPT
When navigating a route, you can select the required event to validate a waypoint and switch to
next one:
Radius of the next WPT: Enter inside the radius of the next waypoint (not any).
Radius of any next WPT: Enter inside the radius of any of the next waypoint (next one
and any of the succeeding ones are OK but not the previous).
Roadbook mode: When entering the radius of any waypoint, it will be set as next. When
going out of it, next one will be activated. This mode is thought for roadbooks, because
when following a roadbook it is required to show the information of the current waypoint
while in its surroundings. This way, instructions for each point can be followed correctly.
Bisector inside next WPT: Enter inside the radius of next waypoint and cross the bisector
that is formed with the previous and the next.
Bisector inside next WPT or 10% of the radius of any WPT: Same as the previous, but if
any waypoint is very near (10% of its radius) it will be validated and the next one will be
activated.
Only buttons bar: Never will automatically change to next waypoint, only manually with
'NextWPT' and 'PreviousWPT' buttons at buttons bar.
Also from this options section, a default radius can be assigned for route waypoints, which will be
taken when this information is not available. It means, if we defined a radius for a concrete
waypoint of the route, it will be respected. But if it doesn't have radius the default one will be
used.
4.8.8
Tracks
Track navigation can be configured to on several points.