Installing the Smart Array 5i Plus Controller and Battery Backed Write Cache Enabler
3-2
Compaq Smart Start 5i Plus Controller and Battery Backed Write Cache Enabler User Guide
COMPAQ CONFIDENTIAL
Writer: Amy L. Laffitte File Name: d-ch3 Installing the hardware
Codename: Executor Part Number: 266328-001 Last Saved On: 4/18/02 2:42 PM
4.
Power down any peripheral devices attached to the server.
5.
Unplug the AC power cord from the outlet, then from the server.
6.
Disconnect any peripheral devices from the server.
WARNING: To reduce the risk of personal injury from hot surfaces, allow
the internal system components and hot-plug hard drives to cool before
touching them.
7.
Remove or open the access panel.
8.
Install the Smart Array 5i Plus Controller and Battery Backed Write Cache
Enabler option. Refer to the documentation that ships with your server and with
the option kit.
9.
Restore all data from the backup you performed in step 1.
CAUTION:
Any information that was not backed up before installation is
permanently deleted when the system is powered up.
10.
Use the Smart Array 5i Plus Controller utilities for configuration:
a.
Run the ORCA utility to configure the first array and logical drive.
b.
Install your operating system.
c.
Run ACU-XE tools to configure and manage server storage with the
Smart Array 5i Plus Controller.
Installation is complete.
