Compaq AlphaServer GS160, Installation Manual

Page: 73 / 92

System Power-Up 4-5
4.3 Powering Up the System
To power up the system, first turn the circuit breakers in all cabinets
on, then set the keyswitch on the OCP to the On position. Example 4–1
shows a sample console display on power-up. See the
AlphaServer
GS80/160/320 Service Manual or the AlphaServer GS80/160/320 User’s
Guide for explanations of the power-up display.
Example 4–1 Power-Up Display
SCM_E0> power on
Powering on PCI Box 0
Powering on PCI Box 1
QBB-0 Powering ON
~I~ Testing OCP Switch- passed
Power ON Phase INIT
QBB-1 Powering ON
QBB-2 Powering ON
QBB-3 Powering ON
~I~ SCM powered via PBM
SCM_E0>
QBB0 now Testing Step-0
QBB1 now Testing Step-0
QBB2 now Testing Step-0
QBB3 now Testing Step-0
~I~ SCMe1 non-csb member while it tests & initializes its
Shared RAM
SCM_E0> .
~I~ QBB0/PSM30 SysEvent: QBB_INIT_CD1
Reg0:7AB3
Reg1:3FFF (test-0) (fmask/fts:8f)
.
~I~ QBB1/PSM31 SysEvent: QBB_INIT_CD1
Reg0:7AB3
Reg1:3FFF (test-0) (fmask/fts:8f)
~I~ QBB2/PSM32 SysEvent: QBB_INIT_CD1 Reg0:768F
Reg1:0FFF (test-0) (fmask/fts:8f)
~I~ QBB3/PSM33 SysEvent: QBB_INIT_CD1 Reg0:768F
Reg1:0FFF (test-0) (fmask/fts:8f)