Compaq AlphaServer GS160, Installation Manual

Page: 32 / 92

2-16 AlphaServer GS160/320 Installation Guide
GS160 with Two System Boxes
Unpack system cabinets and remove the orange shipping brackets. Refer to
Figure 2–5, Figure 2–9, Figure 2–7, and to Figure 2–8 while assembling the
system.
1. Position system cabinet 1 at the predetermined location. Release the tie
wraps on the CSB cable and hose cables that are coiled and attached to the
side of the cabinet for later routing.
2. Lower the corner leveling feet on system cabinet 1 until the system cabinet
is anchored and the casters are free to rotate.
3. Roll the power cabinet along the right side of system cabinet 1 until there is
a minimum separation between the two cabinets
(Figure 2–5).
4. Anchor the power cabinet and adjust the leveling feet for parallel and height
alignment with the adjacent system cabinet
.
5. Secure the cabinets together with four bolts inserted through the system
cabinet
using Allen wrenches contained in the cabinet joining kit (P/N
70-40120-01). Remove the orange shipping brackets.