Compaq 7470 - Presario - 64 MB RAM, Maintenance And Service Manual

Page: 73 / 196

United States
Maintenance and Service Guide
Compaq Presario 7400 Series Computers
MSG index Product Description Troubleshooting Illustrated Parts Catalog
Home Removal & Replacement Jumper & Switch Information Specifications
REMOVAL
SEQUENCE
Electrostatic
discharge
Service
considerations
Preparation
for
disassembly
Serial number
Chassis
Power supply
Mass storage
devices
Fax-modem
Parallel port
assembly
PCI bracket
System board
components
REMOVAL & REPLACEMENT PROCEDURES - BEFORE YOU
BEGIN
Service Considerations
Tool Requirements
Phillips screwdriver
■
Needle-nose pliers
■
Flathead screwdriver
■
Compaq Utilities software
■
Screws
The screws used in these products are not interchangeable. If an incorrect screw is used during
the reassembly process, it could cause damage to the unit. Compaq strongly recommends that all
screws removed during the disassembly process be kept with the part that was removed, then
returned to their proper locations.
IMPORTANT:
As each subassembly is removed from the computer, it should
be placed away from the work area to prevent damage.
Cables and Connectors
Most cables used throughout the unit are ribbon cables . These must be handled with extreme care
to avoid damage. Apply only the tension required to seat or unseat the cables during insertion or
removal from the connector. Handle cables by the connector whenever possible. In all cases, avoid
Compaq.com - Compaq Presario Maintenance and Service Guide - 7400 Series
http://www.compaq.com/athome/support/msgs/7400/service.html (1 of 2) [1/8/2002 3:52:35 PM]