United States
Maintenance and Service Guide
Compaq Presario 7400 Series Computers
REMOVAL SEQUENCE
Preparation for
disassembly
REMOVAL & REPLACEMENT PROCEDURES - BEFORE
YOU BEGIN
Preparation for Disassembly
To prepare the computer for removal and replacement procedures, complete the following
steps:
1
Remove any diskettes, compact discs, or Zip disks from the computer.
2
Turn off the computer and any peripheral devices that are connected to the
computer.
CAUTION:
The computer power switch should
be turned off before you disconnect any cables.
3
Disconnect the power cord from the electrical outlet, and then from the computer.
4
Disconnect all peripheral device cables from the computer.
IMPORTANT:
During disassembly, label each cable as you remove
it. Be sure to note its position and routing.
Compaq.com - Compaq Presario Maintenance and Service Guide - 7400 Series
http://www.compaq.com/athome/support/msgs/7400/prep.html (1 of 2) [1/8/2002 3:52:35 PM]