Compaq 7470 - Presario - 64 MB RAM, Maintenance And Service Manual

Page: 16 / 196

United States
Maintenance and Service Guide
Compaq Presario 7400 Series Computers
MSG index Product Description Troubleshooting Illustrated Parts Catalog
Home Removal & Replacement Jumper & Switch Information Specifications
Removal Sequence
Before you begin
Serial number
Chassis
Power supply
Mass storage devices
Fax-modem
PCI bracket
System board
Instant On button board
Creativity Action Center
REMOVAL & REPLACEMENT PROCEDURES
Power Supply
1 Perform preparation procedures .
2 Remove the chassis .
3 Gently lay the computer on its side with back
connectors closest to the working surface.
4 Remove the four screws that secure the
power supply to the back of the chassis as
shown.
5 Slide the power supply away from the back
of the chassis , rotate it up and away ,
and slide it to the right to remove it from the
slots.
6 Disconnect the power supply cables from the
system board, hard drive, floppy drive, and
CD/DVD drive and remove the cables from
the chassis.
Replacement
To replace the power supply, reverse this
procedure.
privacy and legal statement
Compaq.com - Compaq Presario Maintenance and Service Guide - 7400 Series
http://www.compaq.com/athome/support/msgs/7400/pwrrmv.html [1/8/2002 3:52:11 PM]