United States
Maintenance and Service Guide
Compaq Presario 7400 Series Computers
Product Description
Models and features
CPU controls and lights
Keyboard
Creativity Action
Center
Back components
Power cord
requirements
PRODUCT DESCRIPTION
Power Cord Set Requirements
The power supply should be set based on the country where it purchased and used. The
voltage select switch feature should be set to 115 Volts AC for the USA.
The power cord set (flexible cord and wall plug) received with the computer meets the
requirements for use in the country where the computer was purchased.
Power cord sets for use in other countries must meet the requirements of the country
where you use the computer. For more information on power cord set requirements,
contact your Compaq authorized dealer, reseller, or service provider.
General Requirements
The requirements listed below are applicable to all countries:
1
The length of the power cord set must be at least 6.00 feet (1.8
m) and no longer than 9.75 feet (3.0 m).
2
All power cord sets must be approved by an acceptable accredited
agency responsible for evaluation in the country where the power
cord set will be used.
3
The power cord set must have a minimum current capacity of 10A
and a nominal voltage rating of 125 or 250 volts AC, as required
by each country's power system.
4
The appliance coupler must meet the mechanical configuration of
an EN 60 320/IEC 320 Standard Sheet C13 connector for mating
with appliance inlet on the Switch Box.
Compaq.com - Compaq Presario Maintenance and Service Guide - 7400 Series
http://www.compaq.com/athome/support/msgs/7400/pwrcrd.html (1 of 3) [1/8/2002 3:53:09 PM]
