6-6
Upgrading the Desktop Computer
Writer: Debbie Thomson Saved by: Alyce Klingler-Castle Saved date: 06/13/97 5:32 PM
Pages: 37 Words: 5251 Template: c:\msoffice\templates\comm.dot
File Name Ch6.doc Part Number 270844-002
✎
The configuration label located inside the computer cover
provides additional expansion slot and switch setting
information.
Replacing the Computer Cover
To replace the computer cover, complete the following steps:
1. Holding the cover in an almost vertical position, hook the
front lip of the cover behind the front bezel. Then, rotate
the cover down on the unit.
2. Slide the cover latches on the sides of the computer cover
toward the back of the computer to secure the cover.
Removing the Front Bezel
To install optional drives, you must remove the front bezel to
gain access to the slide-out drive cage.
CAUTION:
Before removing the computer cover and front bezel,
ensure that the computer is turned off and that the power cord is
disconnected from the electrical outlet.
To remove the front bezel, complete the following steps:
1. If you have locked the Smart Cover Lock, use Computer
Setup to unlock the lock.
For more information about Computer Setup, refer to
Chapter 8, “Using Compaq Utilities.”
2. Turn off the computer and any external devices.
3. Disconnect the power cord from the power outlet.
4. Remove the computer cover.
