. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . .
3-32
Diagnostic Tools
Primary Processor Test Error Codes
Continued
Error Code
Description
Recommended Action
122-xx
123-xx
Multiprocessor Dispatch test failed.
Interprocessor Communication test
failed.
1. Check the system configuration
and
retest.
2. Replace the processor board
and retest.
3. Replace the system board and
retest.
199-xx
Installed devices test failed.
1. Check the system configuration
and retest.
2. Verify cable connections and
retest.
3. Check switch and/or jumper
settings and retest.
4. Run the Configuration utility
and retest.
5. Replace the processor board
and retest.
6. Replace the system board and
retest.
Memory Test Error Codes
The 200 series of Diagnostic error codes identifies failures with the memory subsystem.
Corrective action may require replacement of the memory expansion board, the memory
modules, or the processor assembly.
Table 3-3
Memory Test Error Codes
Error Code
Description
Recommended Action
200-xx
Invalid memory configuration.
Reinsert memory modules in
correct location and retest.
201-xx
202-xx
Memory machine ID test failed.
Memory system ROM checksum
failed.
The following steps apply to error
codes 201-xx and 202-xx:
1. Replace the system ROM and
retest.
2. Replace the processor board
and retest.
3. Replace the memory
expansion board and retest.