Trolley Jacks - Operating instruction (GB)-(EN) 2019-04-17.docx
(EN) 2017-05-16 S3 4
Knowhow is the difference
forskellen
Component overview
Functional description
The lifting arm is raised using the foot pedal (D), which quickly raises the saddle (B
) to the vehicle’s lifting
point.
To lift the load, the pumping rod (A) is used, which moves the cylinder (G) forward, lifting the load.
The cylinder is located in the dolly (C) and moves the lifting arm (H) up with the saddle.
To lower the jack, pull the pumping rod up and carefully turn it clockwise; this lowers the load.
The manoeuvring rod has a double purpose, as it is also used for manoeuvring the jack, in addition to
lifting/lowering the jack.
The jack is equipped with 2 fixed wheels (E) in front and 2 swivel wheels (F) in back, for easier
manoeuvring.
Mounting the manoeuvring rod before use
Loosen the finger screw (K) on the side of the head of the manoeuvring rod, insert the manoeuvring rod and
tighten the finger screw with your finger, so it catches the L-groove in the rod.
The screw should be very easy to tighten with your finger if it is correctly positioned. If you feel resistance,
do not tighten the screw.
Pos. Name
A
Handle/Pumping rod
B
Saddle
C
Trolley
D.
Foot petal for fast lifting
E.
Wheel (fixed)
F
Wheel (swivel)
G
Cylinder
H
Lifting arm
K
Finger screw
L
Cover plate
Fig. 1
A
G
C
D
B
H
F
E
K
L
Please note!
On some models, the
pump and cylinder are
best accessed by
removing the cover
plate.(L)
