Trolley Jacks - Operating instruction (GB)-(EN) 2019-04-17.docx
(EN) 2017-05-16 S3 5
Knowhow is the difference
forskellen
Moving the saddle to the lifting position
Use the foot pedal to move the saddle quickly into position under the load.
Important!
It is important that the lifting point is located centred and secure on the lifting saddle
(See Fig. 3).
Lifting the load
When the saddle is touching the load/lifting point, use the pumping rod as shown in (Fig.2).
Note: Position the pumping rod at a 45-degree angle and then pump downward.
This is done to protect the pump from overload and to achieve the most ergonomically correct work
position.
Warning! Failure to observe the above instructions may damage the pump.
When the jack is overloaded, the overload valve opens, and the load cannot be lifted.
Lowering the load
Pull up on the handle/pumping rod and turn it to the right. The lowering speed can be adjusted through the
amount of the rotation.
Maintenance instructions
General maintenance
Follow this
maintenance instruction, to preserve the jack’s safety, performance and service life.
•
All moving parts must be inspected, cleaned and lubricated once a month using a moisture-displacing
and acid-free lubricant.
•
Check the jack for oil leaks and call an authorised service technician if required.
•
In case of rust, remove the rust and protect with a rustproofing agent.
•
Check that wheels, retaining rings, nuts, bolts, and mandrels are correctly mounted.
Cleaning
Ordinary cleaning with mild soap (i.e. dishwashing detergent, auto shampoo) and a soft brush.
Thorough drying will protect the jack’s painted surfaces.
Never wash the jack using a high-
pressure cleaner, as this may damage the jack’s surface and
components.
Before lowering the load, make sure no one is under or near
the vehicle.
Fig 3
45°
Fig 2
WARNING
