Comnet CWGE2FE24MODMS, Installation And Operation Manual

Page: 82 / 84

76
7. Technical Specification
This section provides the specifications of the CWGE2FE24MODMS switch, and the
following table lists these specifications.
Standards
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX/100BASE-FX
IEEE802.3z Gigabit SX/LX
IEE802.3ab Gigabit 1000T
IEEE802.3x Flow Control and Back pressure
IEEE802.3ad Port trunk with LACP
IEEE802.1d Spanning tree protocol
IEEE802.1w Rapid Spanning tree protocol
IEEE802.1p Class of service
IEEE802.1q VLAN Tagging
IEEE802.1x User authentication
Switch architecture
Store and forward switch architecture.
Back plane
8.8Gbps
LED Indicators
System Power (Green )
8 10/100TX module: Link/Activity (Green), Full duplex/collision (Yellow)
8 100Base-FX module: Link (Green)/Activity (Green Blinking)
8 100SFP module: Link (Green)/Activity (Green Blinking)
Gigabit Copper: Link/Activity (Green), 1000Mbps (Green), 100Mbps
(Green), Full duplex/collision (Yellow)
MINI GBIC: Link/Activity (Green), 1000Mbps (Green)
Connector
RS-232 console: Female DB-9
8-port 10/100TX module: RJ-45
8-port 100FX (Multi /Single Mode) module: SC
8-port 100SFP module: SFP
2 Gigabit 2 MINI GBIC Combo: 2 x RJ-45 + 2 x 3.3v MINI
GBIC