61
to process priority queue from High to Lowest queue. For example, as the
system processes 1 frames of the lowest queue, 2 frames of the low queue, 4
frames of the middle queue, and 8 frames of the high queue will be processed at
the same time in accordance with the 8,4,2,1 policy rule.
Highest:SecHigh:SecLow:Lowest:15:7:3:1:
The process order is in
compliance with the transfer rate of 15:7:3:1.
Highest:SecHigh:SecLow:Lowest:15:10:5:1:
The process order is in
compliance with the transfer rate of 15:10:5:1.
802.1p priority [7-0]:
Configure per priority level.
Priority 0 ~ 7:
each priority has 4 priority levels – Highest, SecHigh, SecLow,
and Lowest.
Static Port Ingress Priority:
The port ingress level is from 0 to 7.
TOS:
the system provides 0~63 TOS priority level. Each level has 8 priorities – 0~7.
The default value is “0” priority for each level. When the IP Address packet is received,
the system will check the TOS level value in the IP Address packet that has received.
For example: user set the TOS level 25 is 0. The port 1 is following the TOS priority
policy only. When the port 1 packet received, the system will check the TOS value of
the received IP Address packet. If the TOS value of received IP Address packet is
25(priority = 0), and then the packet priority will have highest priority.
Select
.
Summary of Contents for CWGE2FE24MODMS
