22
DHCP Server – System configuration
The system provides the DHCP server function. By enabling the DHCP server function,
the switch system will be the DHCP server.
DHCP Server:
Enable or Disable the DHCP Server function. Enable – the switch will
be the DHCP server on your local network.
Low IP ADDRESS:
the dynamic IP Address assignment range. Lowest IP Address is
the beginning of the dynamic IP Address assigns range. For example: dynamic IP
Address assignment range is from 192.168.1.100 ~ 192.168.1.200. 192.168.1.100
will be the lowest IP Address.
Highest IP ADDRESS:
the dynamic IP Address assignment range. The highest IP
Address is the end of the dynamic IP Address assignment range. For example:
dynamic IP Address assignment range is from 192.168.1.100 ~ 192.168.1.200.
192.168.1.200 will be the highest IP Address.
Subnet Mask:
the dynamic IP Address assignment range subnet mask.
Gateway:
the gateway in your network.
DNS:
Domain Name Server IP Address in your network.
Lease Time (sec):
It is the time period that system will reset the dynamic IP Address
assignment to ensure the dynamic IP Address will not been occupied for a long time
or the server does not know that the dynamic IP Address is idle.
And
then,
select
Summary of Contents for CWGE2FE24MODMS
