manualshive.com logo in svg

Comnet CWGE2FE24MODMS, Installation And Operation Manual

Share
Download
Comnet CWGE2FE24MODMS Installation And Operation Manual Download Page 3

 

Contents 

   

 

1. INTRODUCTION....................................................................................................... 1

Features ............................................................................................................................. 2

Software Features.............................................................................................................. 3

Package Contents.............................................................................................................. 5

Ethernet Switching Technology.......................................................................................... 6

2. HARDWARE DESCRIPTION ................................................................................... 7

Physical Dimension............................................................................................................ 7

Front Panel......................................................................................................................... 7

LED Indicators.................................................................................................................... 8

Rear Panel ......................................................................................................................... 9

Desktop Installation.......................................................................................................... 10

Attaching Rubber Feet .............................................................................................. 10

Rack-mounted Installation................................................................................................ 11

Power On ......................................................................................................................... 12

3. NETWORK APPLICATION .................................................................................... 13

Connecting to the Switch ................................................................................................. 14

4. CONSOLE MANAGEMENT ................................................................................... 15

Login in the Console Interface ......................................................................................... 15

Module Hot-Swapping............................................................................................... 16

5.

 

WEB-BASED MANAGEMENT............................................................................... 17

About Web-based Management ...................................................................................... 17

Preparing for Web Management ...................................................................................... 17

System Login ................................................................................................................... 18

Main interface................................................................................................................... 19

Main interface................................................................................................................... 19

Summary of Contents for CWGE2FE24MODMS





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands