57
SNMP System Configuration interface
Trap Configuration
A trap manager is a management station that receives traps, the system alerts generated
by the switch. If no trap manager is defined, no traps will issue. Create a trap manager by
entering the IP Address of the station and a community string. To define management
stations as trap manager and enter SNMP community strings and selects the SNMP
version.
1.
IP Address:
enter the IP Address of trap manager.
2.
Community:
enter the community string.
3.
Trap Version:
select the SNMP trap version type – v1 or v2.
4. Select
.
5. To remove the community string, select the community string that you have defined
and select
. You cannot remove the default community string set.
Summary of Contents for CWGE2FE24MODMS
