manualshive.com logo in svg

CommScope RUCKUS ICX 7550, Hardware Installation Manual

The CommScope RUCKUS ICX 7550 offers high-performance networking capabilities. Need help with installation? Download the Hardware Installation Manual for free from manualshive.com, providing step-by-step instructions for seamless set-up. Empower your network with this reliable and efficient product, and get started with the manual today.

Share
Download
background image

Regulatory Statements

•

FCC Warning (US Only)........................................................................................................................................................... 125

•

Canadian Requirements......................................................................................................................................................... 125

•

Europe and Australia (CISPR 32 Class A Warning).................................................................................................................. 125

•

Germany................................................................................................................................................................................. 125

•

VCCI Statement...................................................................................................................................................................... 126

•

KCC Statement (Republic of Korea)........................................................................................................................................ 126

•

China CCC Statement..............................................................................................................................................................127

•

BSMI Statement (Taiwan)....................................................................................................................................................... 127

FCC Warning (US Only)

This equipment has been tested and complies with the limits for a Class A computing device pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual,
might cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference,
in which case the user will be required to correct the interference at the user’s own expense.

Canadian Requirements

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations, ICES-003 Class A.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Europe and Australia (CISPR 32 Class A Warning)

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take
adequate measures.

Germany

Machine noise information regulation - 3. GPSGV, the highest sound pressure level value is 53.0 dB(A) in accordance with EN ISO 7779.

Maschinenlärminformations-Verordnung - 3. GPSGV, der höchste Schalldruckpegel beträgt 53.0 dB(A) gemäss EN ISO 7779.

RUCKUS ICX 7550 Switch Hardware Installation Guide

Part Number: 53-1005648-04

125

Summary of Contents for RUCKUS ICX 7550














































































































































Reviews:

No comments

Related manuals for RUCKUS ICX 7550

ifs POC2502 Series User Manual preview
POC2502 Series
Brand: ifs Pages: 352
3Com OfficeConnect 5 Datasheet preview
OfficeConnect 5
Brand: 3Com Pages: 2
3Com OfficeConnect 3C1670500C User Manual preview
OfficeConnect 3C1670500C
Brand: 3Com Pages: 18
Handic VIC-Switch User Manual preview
VIC-Switch
Brand: Handic Pages: 2
QCT QuantaMesh T1048-LB9M Installation Manual preview
QuantaMesh T1048-LB9M
Brand: QCT Pages: 34
SMART-AVI HDR4X2 Installation Manual preview
HDR4X2
Brand: SMART-AVI Pages: 2
Samson 4747 Mounting And Operating Instructions preview
4747
Brand: Samson Pages: 64
Orei UHD-401MV User Manual preview
UHD-401MV
Brand: Orei Pages: 27
BERNSTEIN CSMS-M-R-H-KA Installation And Operating Instructions Manual preview
CSMS-M-R-H-KA
Brand: BERNSTEIN Pages: 38
serverLink SL-271-H Quick Installation Manual preview
SL-271-H
Brand: serverLink Pages: 2
Cabletron Systems SEH-22 User Manual preview
SEH-22
Brand: Cabletron Systems Pages: 56
TCi 13811 Installation Manual preview
13811
Brand: TCi Pages: 11
Zektor HDS4x2 User Manual preview
HDS4x2
Brand: Zektor Pages: 30
Intellinet 560757 User Manual preview
560757
Brand: Intellinet Pages: 12
ALC AHSS41 Quick Start Manual preview
AHSS41
Brand: ALC Pages: 2
VS LIGHTING SOLUTIONS Blu2Light PrimeLine 187042 Quick Start Manual preview
Blu2Light PrimeLine 187042
Brand: VS LIGHTING SOLUTIONS Pages: 2
Kramer VP-440X User Manual preview
VP-440X
Brand: Kramer Pages: 71
Cajun P220G Configuration And Operation Manual preview
P220G
Brand: Cajun Pages: 135

Brands by name

Popular brands

Load more brands