Page 39 of 41
© 2019 CommScope, Inc. All Rights Reserved
20.2.2 Mounting tabs installation
20.2.2.1
Break off the two mounting tabs.
20.2.2.2 Note: the two tabs are not identical. Make sure to mount the tabs in the correct position.
Small hole facing upwards.
20.2.2.3 Mount the tabs on the base at both sides (top an bottom).
20.2.3 Wall mounting
20.2.3.1 Using the mounting tabs as a template, mark the mounting screw locations onto the selected surface for the
installation. Install wall plugs first, then position the closure with the mounting tabs against the surface. Continue with the
washers and the screws to secure the closure onto the surface.
2
3
1
TOP
BASE
BOTTOM
BOTTOM
20.1.5 Detach closure from the mounting bracket
20.1.5.1 Push the locking tab(s) to the inside. Keep the locking tab(s) pressed in while moving the closure upwards.
20.2 Using the mounting tabs
20.2.1 Kit contents
N° Description
Qty
1
Mounting tabs
1
2
Mounting kit (4 screws, 4 plugs, 4 washers)
1
1
2