16.1 Slide the FOSC-A-BASKET onto the
tray support and secure with screw. Coil the
ribbon fiber or bear fiber (e.g. central core
cable) with the basket and secure.
16
Storage of ribbon or
bear fiber
17
Intertray jumpers
17.1
When it is necessary to splice fibers
that are placed on different splice organizer
trays an intertray jumper may be used to route
one or more fibers to the desired tray.
17.2
Secure one end of intertray
transportation tube to the splice tray and
secure with two tie-wraps.
17.3
Define the length of intertray jumper
tube and mark. Proceed in the same way as
per point 7.
17.4
Route the fibers in the jumper tube.
17.5
Carefully bend the intertray jumper
tube to the appropriate tray and secure to the
splice tray with two tie-wraps.
17.6
The fibers may now be spliced or
stored.
© 2017 CommScope, Inc. All rights reserved.
FOSC, SMOUV and all trademarks identified by ® or ™ are registered
trademarks or trademarks, respectively, of CommScope, Inc.
This document is for planning purposes only and is not intended to modify or
supplement any specifications or warranties relating to CommScope products
or services.
This product is covered by one ore more U.S. patents or their foreign
equivalents. For patents, see:
www.commscope.com/ProductPatent/ProductPatent.aspx.
To find out more about CommScope® products,
visit us on the web at www.commscope.com
For technical assistance, customer service, or to
report any missing/damaged parts, visit us at:
http://www.commscope.com/SupportCenter
