30
Installing Workbench onto a Hard Disk
1. Boot off the
Install
disk and open the Install script for your language, the following languages are
supported on W orkbench 3.1:
English, French, Italian, Germ an, Denm ark, Netherlands, Portuguese, Norwegian, Swedish.
2. If it finds your hard disk click Proceed.
3. Select ‘Install Release 3'.
4. Select the installation m ode: Novice, Interm ediate or Expert then Proceed.
5. Select the language to use. By default English is selected.
6. Select any Printers to use, then click on Proceed.
7. Select a Key m apping to use then click on Proceed.
8. W orkbench will begin to install, it m ay ask for additional disks such as Extras, Fonts, Locale,and
Storage.
9. Once installation is com plete, eject any floppy disks and reboot the Am iga.
10. W orkbench should load. Copy the
Installer
program from Install disk to the C folder for any
application installations.
If you do not have an Install disk, you can m anually install W orkbench, by opening a Shell window,
insert the workbench disk on DF0: and type:
COPY DF0: TO DH0: ALL CLONE QUIET
This will copy all the folders and files (including the im portant hidden drawers) from your W orkbench
floppy disk to your Hard disk (HD0: in this case).
You can copy the contents of the other disks as well using the sam e copy com m and, for Fonts, m ake
sure you create a Fonts drawer on the hard disk first, and copy the fonts disk contents into that folder.
