background image

10

Care and Cleaning

 

and a soft, damp cloth only.

 

 

Troubleshooting

Problem

Possible Cause

Solution

The light does not turn 
ON.

There is no power to the 

 

Check if circuit breaker is tripped.

 

The light cycles ON 
and OFF continuously.

The photocell light sensor is 

 

 

OR place the optional photocell cover over the photocell light sensor and use 
the wall switch to turn the light ON and OFF.

through a dimmer switch.

standard ON/OFF switch.

The light stays ON.

The light sensor is in a 
shaded area.

 

daylight hours for the light sensor to work.

 

OR place the optional black cover over the photocell light sensor and use the 
wall switch to turn the light ON and OFF.

The light sensor is faulty.

few minutes, then the sensor may be faulty. Please contact customer service.

NOTE:

 Photocell (E) has a short delay in order to reduce its sensitivity to sudden light changes. When testing, shine a light and cover 

CCT Setting

Note:
4000K is default setting

3000K

4000K

5000K

Selecting CCT and FAO

Remove the CCT and DIM cap and select the desired combination of Wattage (brightness) output and CCT (light color temperature) as desired.

FAO Setting

Note:
60W is default setting

40W

50W

60W

Note:
90W is default setting

70W

80W

90W

1008369606

1008369606

1008369616

1008369616

Summary of Contents for 1008367367












Reviews: