8
Installation (continued)
5
Making the electrical connections
Junction Box
□
Follow the wiring instructions given below to make the
electrical connections. (Fig. 1).
Surface Conduit Mount
□
sides from the where conduit will enter. (Fig. 2)
□
instructions given below.
□
If necessary, strip 3/8 in. of insulation from junction box or
ON/OFF Wiring (Non Dimming) Method:
□
common) by twisting the exposed wires together and using
the wire nuts (BB). Ensure there are no loose wires.
□
wire by twisting the exposed wires together and using the
wire nuts (BB).
0-10V Dimmable Wiring Method:
□
common) by twisting the exposed wires together and using
the wire nuts (BB). Ensure there are no loose wires.
□
wire by twisting the exposed wires together and using the
wire nuts (BB).
□
Connect the purple wire to the (V+) DIM wire and the
pink wire with (V-) DIM wire by twisting the exposed wire
together.
NOTE:
Hold stripped ends near each other and align any
frayed strands (do not twist wires).
twist the wire nut clockwise until tight. Check for tightness by
pulling wires.
(+) Line
Black
White
Lighting
Fixture
Green
(-) Common
Ground
3/8 in.
Non-Dimming Wiring Diagram
(+) Line
Black
White
Lighting
Fixture
Green
(-) Common
Purple
(+)DIM V+
Pink
(-)DIM V-
Ground
0−10V Dimming Wiring Diagram
Fig. 1
Fig. 2
BB
BB
D
B
