APR/16/2002
6979 USA
14
ROGRAMMING
A. PROGRAMMING TRANSMITTER:
PROGRAMMING THE REGULAR REMOTE TRANSMITTER
Important Note:
This program mode is for regular remote transmitter and passive/active transmitter
programming only; do not program the TX780V two-way LCD screen transmitter on this mode.
Note:
This mode will only retain the last 4 remote transmitters programmed. If the transmitter memory is
exceeded, the security system will start deleting transmitters from memory in chronological order.
Enter:
1. Turn the Ignition 'switch ‘OFF/ON’ 3 TIMES and stay in ON position. Within 15 seconds.
2. Push the Valet switch 3 times and hold it until a long chirp is hearing then release the valet switch. You
are now in the Transmitter programming mode.
Program:
1. Press button on one of the transmitter until the siren responds with a confirming chirp the first transmitter
is now programmed.
2. Press button on the second transmitter until the siren responds with a confirming chirp, the second
transmitter is now programmed.
3. Apply the same procedure to program 3rd and 4th
.
Exit:
Turn Ignition to 'OFF' position, or leave it for 15 seconds. A 3 long chirps & 3 parking light flashes to
confirm exit.
∆
This system has an unique optional TX040 passive/active transmitter design, it’s programming is
the same as above. (To see how it works, please see operation part.)
PROGRAMMING THE TX780V TWO-WAY LCD SCREEN REMOTE TRANSMITTER
Important Note:
This program mode is for TX780V two-way LCD screen transmitter programming only; do
not program other style transmitter on this mode.
Note:
This mode will only retain the last 2 remote transmitters programmed. If the transmitter memory is
exceeded, the security system will start deleting transmitters from memory in chronological order.
The two-way LCD screen remote transmitter can be add on for this system. The two-way remote transmitter
actively gives an immediate report to the remote transmitter on any violations occurred to your vehicle both
by visual graphic icon and audio sound.
When you press a button of two-way remote transmitter, you can make sure if your command has been
correctly delivered to the system module in your vehicle, The displayed graphic icon on the LCD screen as
well as by hearing a confirming melody sound from your two-way remote transmitter.
Enter:
1. Turn the Ignition 'switch ‘OFF/ON’ 3 TIMES and stay in ON position. Within 15 seconds.
2. Push the Valet switch 6 times and hold it until a long chirp is hearing then release the valet switch. You
are now in the two-way LCD screen remote Transmitter programming mode.
Program:
1. Press Button on one of the transmitter until the siren responds with a confirming chirp the first transmitter
is now programmed.
2. Press Button on the second transmitter until the siren responds with a confirming chirp the second
transmitter is now programmed.
Note: Maximum (2) two-way LCD screen remote transmitter can be program.
Exit:
Turn Ignition to 'OFF' position, or leave it for 15 seconds. A 3 long chirps & 3 parking light flashes to
confirm exit.
IMPORTANT NOTE: This program mode is for TX780V two-way LCD screen transmitter programming
only; do not program other style transmitter on this mode.
