9 of 35
NOTE:
Before setting the IP address, Mask, Gateway and DNS, check the network
information of your PC. Please follow the steps below to get the network information of
your PC.
Step 1:
Click on “Start” → “Run” and type in “command”, then press “ENTER”.
The MS-DOS window will appear, type in “ipconfig” and then press “ENTER”
to get the network information.
Step 2:
Assign IP Address, Mask (Subnet Mask) and Gateway (Default Gateway) for
the ecoHD II.
Enter the same values of the Subnet Mask and Gateway, and be careful not
to enter the values of IP address that are already used by other devices on
the network.
