12
INSTALLATION & USE
www.comfortcompany.com
INSTALLATION (QUANTUM MOUNTING)
For Quantum
®
TRU-Comfort
2
Back Supports on TRU-Balance
3
Seating System using Quantum Mounting Block.
G
B
B
A
C
D
Note: This process can not be completed if mounting bracket
C
is already mounted to the back support.
Remove screws
E
(pictured above) prior to step
1
if needed.
1
If head support hardware
stem
is inserted in mounting block
B
, turn knob
A
counterclockwise to release it and set aside.
2
Attach mounting plate
C
to back support
G
with socket head screws
E
and tighten using
4mm a
llen wrench.
3
Insert hardware stem into mounting bracket
B
and turn knob
A
clockwise to secure.
Note: Make sure at least
½
” of stem is completely through the bottom of
B
at all times. See pages 16-20 for final adjust-
ments.
E
C
Alternate option when using Quantum Mounting Block.
Instructions to be used in combination with images above.
Alternate Mounting Block Placement on Mounting Bracket
1
Remove flat head screws
D
on mounting plate
C
using phillips head screwdriver.
2
Align mounting block
B
and alternate countersunk holes of mounting plate
C
and attach with flat head screws
D
.
Make sure the screw heads are flush with mounting plate
C
when tightened.
