18
SET UP & ADJUSTMENTS
www.comfortcompany.com
SET UP & ADJUSTMENTS (GT HARDWARE)
Lateral Style GT Hardware (without additional link added) shown. Mid-line GT hardware will not have angle adjustment points.
Adjustments to be made simultaneously with pad positioning adjustments.
A
H
D
A =
Angle/Lateral Offset
D =
Depth
H =
Height
1
Loosen all hardware adjustment point screws
allowing for full articulation of the head support
to a desired position.
2
Hold hardware and pad in place while tightening each
joint.
Note that adjustments may be affected by each
other as gear teeth engage and require compensation
from other joints before final tightening.
ATTENTION: It is crucial that gear teeth in all joints are
properly aligned and engaged for a secure set up.
14W x 5L pad shown
D
A
Gear Tooth Alignment
