16
INSTALLATION & USE
www.comfortcompany.com
Instructions apply to both Basic and Premium pads with
any style of hardware.
Final pad positioning should be completed in conjunction with hardware adjustments detailed on following pages. Premium BodiLink
®
Head Support
pads have a preformed curvature for optimal posterior contact, and 10 - 18” W pads have 2 points of adjustment for additional lateral support.
INSTALLATION (SUPPORT PAD)
SET UP & ADJUSTMENTS (PADS)
1
1
Align ball link
A
and ball ring
B
with ball receiver
C
.
2
Loosely engage screws
D
and safety washers
E
with ball receiver
C
to complete the assembly.
3
Continue through page 20 for final adjustments.
A
B
C
D
C
180
°
A
B
E
8W x 4L Premium Pad and GT Hardware Shown
2
14W x 5L Premium Pad Without Cover
and GT Hardware Shown
Gear Tooth Alignment
1
Loosen all hardware adjustment point screws allowing
for full articulation of the head support to a desired
position. Loose screws
A
around ring
B
will allow pad
orientation adjustment.
Note: Premium BodiLink
®
head support pads are de-
signed to be used in any orientation including flipped
180º as shown.
2
PREMIUM PADS: To access wing adjustment screws
C
on 10” - 18”W pads, partially unzip the locking zippers
under the cover flaps. Screw heads are accessible in
the channels. Ensure gear teeth are properly aligned
before final tightening.
3
BASIC PADS: Mold pad by bending with hands or over
a firm surface. Basic pads not pictured.
ATTENTION: If screws
A
are are not evenly
tightened all around ring
B
, unwanted movement
may occur. Additionally, the gear teeth on
premium wing adjustments must be properly
aligned and engaged for a secure setup.
