11
INSTALLATION & USE
INSTALLATION (PERMOBIL
B MOUNTING BLOCK
)
For Permobil
®
Corpus Back Supports 20”H using
Permobil B Mounting Block.
Alternate options when using Permobil B Mounting Block.
Standard and Alternate Mounting Block Placement on Mounting Bracket
Accessory Rail attached to Mounting Bracket
Countersunk Holes
1
If head support hardware
stem
is inserted in mounting block
B
, turn knob
A
counterclockwise to release it and set aside.
2
Using 5mm hex key, loosen screws
C
to release washers
D
, and double nuts
F
from mounting bracket
E
.
3
Move back support cover (not pictured) allowing access from both sides to head support holes on back support shell
G
.
4
Align mounting bracket
E
with head support holes on back support shell
G
and double nuts
F
.
5
Replace screws
C
and washers
D
and tighten.
6
Replace and secure back support cover.
7
Insert hardware stem into mounting block
B
and turn knob
A
clockwise to secure.
Note: Make sure at least
½
” of
hardware stem is completely through the bottom of
B
at all times. See pages 16-20 for final adjustments.
1
Remove screws
G
and washers
H
on mounting block
B
.
2
Align mounting block
B
with alternate holes on
mounting bracket
E
.
3
Replace screws
G
and washers
H
and tighten.
F
F
E
G
E
B
H
G
D
D C
C
B
E
A
Note: Additional Corpus Seating System accessory rail can
be attached to the inner face of mounting bracket if needed
using the countersunk holes on the mounting bracket. Access
countersunk holes using instructions to the left. Please refer
to accessory rail instructions for proper attachment and use.
