COMFORT-AIRE RADS Series, Owner'S Manual

Page: 23 / 32

Air
Condi
ti
oner
Features
 Page 23 
CAUTION
Please always wait 3 minutes when turning unit
off then on again, and when changing from cool
to fan and back to cool. This prevents
compressor from overheating & possible circuit
breaker tripping.
WARNING
To reduce the risk of fire, electric shock, or
injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS before operating
this appliance.
To begin operating the air conditioner,
follow these steps:
1. Set the thermostat to the highest number
(coldest or cooler setting).
2. Set the selector control to the highest COOL
setting.
3. Adjust the louver for comfortable air flow (see
Air Directional Louvers).
4. Once the room has cooled, adjust the
thermostat to the setting you find most
comfortable.
5. Make sure that the air flow inside and outside
are not obstructed by anything.
The louvers will allow you to direct the air flow Left or Right
throughout the room as needed.
Move the Levers from side to side until the desired Left/Right
direction is obtained.
Air Directional Louvers
Fresh Air Vent Control
（
on 10-12 K MODELS
）
Lever
Air D irec tion
for 05K, 06K
Levers
Air D irec tion
Levers
Air Direc tion
Air D irec tion(4- way)
Levers
The louvers will allow you to direct the air flow Up or Down(on some models) and Left or Right
throughout the room as needed. Pivot horizontal louvers until the desired Up/Down direction is
obtained. Move the Lever(s) from side to side until the desired Left/Right direction is obtained.
The Fresh Air Vent allows the air conditioner to:
1. Recirculate inside air - Vent Closed (See Fig.A)
2. Draw fresh air into the room- Vent Open (see Fig.B)
3. Exchange air from the room and draws fresh air into the room - Vent and Exhaust Open (see Fig.C)
for 06K, 08K, 10K, 12K, 15K, 18K, 25K,28.5K
F ig. A
(VENT CLOSED)
cord.
F ig. B
(VENT OPEN)
F ig. C
(VENT & EXHAUST OPEN)
AIR CONDITIONER FEATURES