COMFORT-AIRE RADS Series, Owner'S Manual

Page: 11 / 32

 Page 11 
Installation Instructions
"
Ⅰ
"section
Top Rail
Bottom Rail
Top Rail
Bottom Rail
Top left
Top right
Fig.2
Fig.3
Fig.4
NOTE: If storm window blocks AC, see Fig. 11.
B. Slide the free end " I" section of the panel
directly into the cabinet as shown in Fig. 2. Slide
the panel down. Be sure to leave enough space
to slip the top and bottom of the frame into the
rails on the cabinet.
C. Once the panel has been installed on the side
of the cabinet, make sure it sits securely inside
the frame channel by making slight adjustments.
Slide the top and bottom ends of the frame into
the top and bottom rails of the cabinet. Fig .3.
D. Slide the panel all the way in and repeat on
the other side.
Wooden Windows
INSIDE
OUTSIDE
H:About 3/4 to 1
（
for 5 to 8K);
Measure from the cabinet edge
3 H:About 1 to 1 /
（
for 10 to12K);
8
H
Vinyl-Clad Windows
INSIDE
OUTSIDE
H:About 3/4 to 1
（
for 5 to 8K);
Measure from the cabinet edge
3 H:About 1 to 1 /
（
for 10 to12K);
8
H
INSTALL SUPPORT BRACKET
5
SECURE THE ACCORDION PANELS
NOTE:
Check that air conditioner is tilted back
about H (Fig.5A and Fig.5B) (tilted about 3°to
4°downward to the outside).
After proper installation, condensate should
not drain from the overflow drain hole during
normalu se,correct the slope otherwise.
Fig.5A
Fig.5B
Fig.6
A.Keep a firm grip on the air conditioner,
carefully place the unit into the window
opening so the bottom of the air conditioner
frame is against the window sill (Fig.5A and
Fig.5B). Carefully close the window behind the
top rail of the unit.
B.Extend the side panels out against the window
frame(Fig.6).
A.Place the frame lock between the frame
extensions and the window sill as shown(Fig.7A
for Wooden windows), (Fig.7B for Vinyl-Clad
windows) .
window
frame
4