Page 18
Installation
Instructions
Window Sash Seal
Fig.18A
A.3/ 4 (or 1/2 ) long hex head screw
B. Left-hand Window Filler
Panel Top Leg
C. Window channel
Fig.18B
A.3/ 4 (or1/2 ) long hex head screw
Safety Lock
3 4 (or1 )Long
Hex-head Screws
/2
1. Extend the window filler panels out against
the window frame.
2. Use a 1/8" drill bit to drill a starter hole
through the hole in the top leg of each window
filler panel and into the window sash (Fig. 18A
and Fig. 18B). Connect with one 3/ 4 " (or 1/ 2")
long hex head screw.
1. Trim sash seal to fit window width. Insert
into space between upper and lower sashes
(Fig.18).
2. Attach right angle safety lock (Fig. 19).
4. Attach the top angle to window frame: Use a
3/32" drill bit to drill one hole through the hole
in the middle of top angle into the window frame,
and drive one 3/ 4 " (or 1/ 2 '' ) HEX-HEAD locking
screw through hole in the middle of top angle
into the window frame as shown (Fig.17A)
3. Attach the Lock Frames to the winow sill
using two 3/ 4 " (19mm) screws(Fig.18C)
(on some models)
7
Attach Window Filler Panels to
Window Frame
8
Install Window Sash Seal and Safety
Lock
Fig.17A
Fig.18C
Fig.18
Fig.19
3/ 4 (or 1/ 2 ) long
HEX-HEAD
SCREW
Summary of Contents for RADS Series
Page 2: ......
