COMEX S.A.
CMX: 202023.01 EN
13
Troubleshooting
Problem
Possible Cause
Solution
ATS PDU outlets do not
provide power to
connected equipment
1. Breaker tripped
2. Power cord is not properly plugged
in
Reset Breaker, check the plug to insure its
connected correctly. If the problem remains,
contact technical support.
Amperage displayed on
LCD Display exceeds the
units capability
Overload
The load indicator shows red when overload.
Reduce the load on the ATS PDU until the overload
is gone. If the problem remains, contact technical
support.
Circuit breakers have
tripped
1. Sustained overload
2. Excessive ambient or internal
temperatures
3. Faulty breaker
Reset Breaker.
If the problem remains, contact technical support.
