COMEX S.A.
CMX: 202023.01 EN
10
Operation
Remote Management
The remote management function provides for monitoring of the ATS PDU operational information,
controlling outlets and utilizing SNMP functionality.
Web
Remote management can be performed via web interface. To access the web interface, please follow
the instructions below:
1.
Enter the IP address of the ATS PDU into a web browser (Internet Explorer, Firefox).
2.
Enter the user name and password of the ATS PDU device at the authentication screen.
Note: The default username is “admin” and the default password is “admin”.
Telnet/SSH
The ATS PDU provides Telnet and Secure Shell (SSH) as Remote Management methods. Telnet uses
user name and password as basic security while SSH has a higher security level with encryption of the
transmitted packets including user name, password, and data. Configure the Setting of Telnet and SSH
on the Web Interface. The default user name and password is admin/admin.
SNMP
The ATS PDU supports SNMPv1 and SNMPv3 Remote Management protocols. Download the MIB file
and add it to a SNMP-supporting management software. Default read/write community is
public/privated for SNMPv1. SNMPv3 provides a higher security level than SNMPv1 by encrypting the
transmitted packet. Configure the settings of the SNMPv1/SNMPv3 on Web Interface
Local Management
LCD Operation
The LCD display provides instant information, such as source condition, voltage and current, for the
ATS PDU. In addition, users can use the interface to configure each PDU parameters and control each
outlet on the switched ATS PDU.
1.
Scroll Mode: The ATS PDU information will display in following order automatically when
“Scroll Mode On” is configured.
Source A information
Source B information
Device Load
Bank 1 Current (2U series)
Bank 2 Current (2U series)
Bank 3 Current (2U series)
Environment Status (Displays when the environment sensor is connected)
