IE-SNC-P85x1-11
9
click to
Change IP address
to set new address according to network
administrator instructions. If your device is not listed, then click
Help! My
device wasn’t found!
Then follow the instructions. MAC address is on
product label. The device is factory set to IP
192.168.1.213
.
gateway may not be entered if you want to use the device only in local
network. If you set the same IP address which is already used, the device will
not work correctly and there will be collisions on the network. If the device
detects a collision of IP address then reboot is performed automatically.
after changing IP address device is restarted and new IP address is assigned.
Restart of the device takes about 10 seconds.
connect to device using TSensor software and check the measured values. If
P8511 or P8541 Transducer values are not displayed, it’s necessary to find
probes using button
Search probes (Find probes)
.
set the other parameters (alarm limits, SMTP server, etc.). Settings are saved
after click on button
Save changes
.
