IE-SNC-P85x1-11
6
Getting started
Here you can find informations necessary to put newly purchased equipment to
operation. This procedure is only informative.
What is needed for operation
To install the unit you need to the following equipment. Before installation check if it’s
available.
P8510 Thermometer or P8511 Transducer, P8541 Transducer
power supply adapter 5V/250mA (or compatible PoE splitter)
RJ45 LAN connection with appropriate cable
free IP address in your network
for P8511 Transducers one probe. For P8541 Transducer up to 4
temperatures probes type DSTR162/C, DSTGL40/C, DSTG8/C or relative
humidity probe DSRH
Mounting the device
check if the equipments from previous chapter are available
install the latest version of TSensor software. This software is used to all
device settings.
TSensor software can be free downloaded from the manufacturer’s website.
Software can be also supplied on CD. Device configuration can be made
using web interface. For web configuration is not TSesnor software necessary.
contact your network administrator to obtain following informations for the
connection to the network:
IP address:
_____._____._____._____
Gateway:
_____._____._____._____
Netmask:
_____._____._____._____
Chapter
2
