__________________________________________________________
7.2.2.3 WDS configuration – Wireless distribution
system
This functionality allows different access points (Maximum 6)
to relay the wireless communications from the transmitter to
the final destination.
You can generate a meshed network.
In each AP, you need to enter the wireless M.A.C addresses of
all the other APs you want to communicate with.
Then your router is acting both as multipoints bridge relay
and as a simple access point.
NOTE / WDS connection between various APs may require
WPA-PSK in AES mode.
A technical note explaining how to configure WDS is available
on comet Lab’s web site at
www.cometlabs.com
When the parameters are set, do not forget to apply and save
the settings to avoid their loss after a power shortage or
reboot process.
