7596004CM - Manuale EASYBLUE COMENDA ENG ok
- 19 -
5
ORDINARY MAINTENANCE
5.1 QUALIFICATION OF MAINTENANCE PERSONNEL
The maintenance personnel, must meet the requirements listed below, and also be aware of this
manual and all safety information:
General education and technical level sufficient to understand the content of the manual.
Knowledge of the main rules of hygiene, safety and technology.
Overall knowledge of the equipment and the electrical and plumbing issues that may be
encountered on the place where the equipment is installed.
5.2 RESPONSIBILITIES OF MAINTENANCE PERSONNEL
The overall maintenance plan, described in this chapter, must be rigidly adhered to as indicated in the
above paragraph, in order to maintain the efficient operation of the device, thereby guaranteeing
continued water quality.
WARNING
The tasks listed in the box below must be performed by qualified technical personnel,
strictly in accordance with the manual, exclusively using approved parts and materials.
Otherwise the guarantee will be null and void. The maintenance performed must always
be documented properly and signed by the technician in the space provided on the
attached maintenance log.
It is advisable to carry out ordinary maintenance at least 1 time every 6 months even if
you have not reached the limit of exhaustion of the filters.
WARNING
This equipment should be controlled periodically to ensure that water supplied
maintains its characteristics of potable water.
ITEM TO CHECK
CONTROL
FREQUENCY
Machine
6 MONTHS
or
10000 litres
(*)
Visual control of the integrity and state of
conservation
General cleaning
Check running
Sanitation of hydraulic circuit
Activated carbon filter
Replacement
(*) Special water conditions may require more frequent maintenance.
WARNING
Use only original COMENDA spare parts.
ATTENTION
The internal electrical system of the EASY:BLUE is powered by 230 Volts.
Before opening the device, remove the cover and/or panels and/or the protective
grill, ensure that the plug has been removed from the electrical outlet.
ATTENTION
DO NOT use corrosive products, acids, steel wool or wire brushes to clean the device.
DO NOT use direct or high pressure jets of water to wash the device.