Comdial DSU II Series User Manual Download Page 10 | Manualshive

Page: 10 / 106

background image

Positioning Your Speakerphone

You should adjust the position of the speakerphone on your desk or table to suit your
individual needs and maximize the performance of the sound activated features.
When using your speakerphone, the microphone and loudspeaker are farther from
you than when you use a handset. Some positioning tips to consider include:

·

For the microphone to best detect your voice, speak within three feet of it and
face the speakerphone.

·

Background noise may prevent the sound-activated switches from operating
properly. Avoid placing the speakerphone where it will detect sounds from
typewriters, keyboards, printers, paging systems, and other equipment.

·

Place the telephone on a hard surface and away from table edges. Do not
place the telephone in corners or enclosures. Do not let obstructions come
between you and the microphone.

If you are using an Impact SCS model, your telephone has an adjustable pedestal to
allow you to select the most comfortable viewing angle. When you receive the
telephone, the pedestal is in its lowest
position—flush against the pedestal.

·

To adjust the pedestal (Impact
SCS Models only),

1. GRASP the rear of the pedestal base

firmly with one hand AND LIFT the
rear portion of the telephone upward
with your other hand.

2. LIFT the telephone upward with

o n e h a n d A N D R A I S E t h e
telephone supporting arms upward
with your other hand. (Notice there
are three sets of notches under the
telephone corresponding to the three positions available.)

3. When the telephone is at the desired height, SELECT the closest

pair of notches AND INSERT the supporting arms in the notches.
PRESS DOWN slightly on the telephone until you feel the
supporting arms snap into place.

Also remember, as with any piece of electronic equipment, your telephone may be
damaged by contact with liquids. So please try to place the telephone in an area that
is free from the danger of spills.

2

LCD Speakerphone Station User’s Guide

Getting Started

GCA70-281

Telephone

Pedestal Base

Supporting Arm

PED01

First Notch
Second Notch

Third Notch

(For Highest Position)

Adjusting The Pedestal

«
...
8
9
10
11
12
...
»

Summary of Contents for DSU II Series











































































































Reviews:

No comments

Related manuals for DSU II Series

Brand: NEC Pages: 144

Brand: Panasonic Pages: 10

Brand: Panasonic Pages: 6

Brand: Panasonic Pages: 32

Brand: Panasonic Pages: 3

Brand: Panasonic Pages: 2

KX-TC1461B - Cordless Telephone

Brand: Panasonic Pages: 6

Brand: Panasonic Pages: 23

KX-T7885 - Battery For

Brand: Panasonic Pages: 48

Brand: Panasonic Pages: 52

Brand: Panasonic Pages: 48

Brand: Panasonic Pages: 8

Brand: Panasonic Pages: 3

Brand: Panasonic Pages: 12

Brand: Panasonic Pages: 132

Brand: Panasonic Pages: 12

HYBRID IP-PBX KX-TDA200

Brand: Panasonic Pages: 824

EASA-PHONE KX-T30810

Brand: Panasonic Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands