7
www.combisteel.com
Warning: The night cover requires a careful handling. The night cover should be raised/lowered
smoothly, without any jerks and distortions, using a special handle, until the cover fixation. This is necessary to
avoid damage to the mechanism and wear of the night cover material.
Warning: If the customers do not fulfil the above requirements, the warranty for the night cover is not
provided!
See Appendix E for the night cover installation instructions.
2 Datasheet specifications
2.1 Scope of delivery
The delivery set complies with the Packing list (appended to the Manual).
2.2 Acceptance certificate
Refrigerated wall display case series Monte ____________________, serial number _______________
is manufactured and accepted in accordance with the requirements of Specification TU 28.25.13-002-066486978
-2017, current technical documentation and is found fit for use.
Date of manufacture________________201___
Responsible for the acceptance________________________(signature)
L.S.
3 Proper use
3.1 General guidelines
The Manual provides information necessary for the proper operation and maintenance of the display cases
during their intended use. The display case service life and safety in operation depend on observance of the
operating rules.
3.2 Safety measures
The display cases meet the safety requirements of Technical Regulations of the Customs Union: TR CU 004/2011
"On safety of low-voltage equipment", TR CU 010/2011 "On safety of machinery and equipment", TR CU
020/2011 "Electromagnetic compatibility of technical means".
The display cases belong to I class of human protection against electric shock according to GOST IEC 60335-1.
The degree of protection provided by enclosures is IP20.
Warning: Observe the following safety rules when working with the display cases:
-
check the cable before connecting the display cases to the mains and make sure it is working properly;
-
connect the mains plug to a grounded socket only;
-
the power cord may only be replaced by the qualified personnel authorized to this type of works;
-
in case of any faults in the electrics (wire insulation fault, ground wire breakage, etc.), immediately
disconnect the display case from the mains and call an electrician.
-
connect the showcases to the supply mains (Fig.4) via an automatic circuit breaker of combined
(thermal and electromagnetic) protection with a rated current value of:
a)
6.3A - for Monte 1250, Monte 1875, Monte 2500;
b)
10А - for Monte 3750.
