Section 11 - Installation of Car Seat in Vehicle (continued)
38
Tighten lower anchorage belt to secure the base.
Press down in center of Base to depress the
vehicle cushion and pull free end of Lower
Anchor Belt to tighten belt around Base
(fig. k)
.
Check for secure installation. Pull Base front
to back and left to right to check for secure
installation
(fig. m)
. LATCH belt MUST stay
tight.
If LATCH belt does not stay tight or Base
cannot be securely installed, try a different
LATCH location or use the vehicle’s seat
belt to secure the Base.
Attach car seat to Base. Keep handle up
in carry position.
Lift car seat to ensure it is properly attached
to Base (see “Attachment of Car Seat to Base”
section.
Recheck recline of car seat. Adjust if necessary
(see section 11a “Adjusting Base for Proper Car Seat Recline”).
(fig. m)
(fig. k)
11
12
13
14
CCS0262D 090209.qxd:CCS0262D 090209 9/2/09 1:14 PM Page 39
