Section 11 - Installation of Car Seat in Vehicle (continued)
48
Tighten the vehicle lap belt around car seat.
Press down firmly on car seat to compress
vehicle seat cushion while tightening vehicle
lap belt
(fig. c)
.
Check for secure installation. Pull front to back
and left to right to check for secure installation
(fig. d)
. Vehicle lap belt MUST stay tight.
If vehicle lap belt does not stay tight,
see “Vehicle Seat Belts” section or
move to a different setting location.
NOTE:
Lap and Shoulder Belts
If using a lap and shoulder belt
and the lap belt does not stay
tight, unbuckle seat belt and
pull out on latch plate
(fig. e)
.
If belt slides freely through latch
plate, a locking clip must be
used as described in “Locking
Clip” section.
7
(fig. d)
8
(fig. c)
9
(fig. e)
CCS0262D 090209.qxd:CCS0262D 090209 9/2/09 1:14 PM Page 49