Combi Shuttle 33 8097 Series Instruction Manual Download Page 75

Page: 75 / 80

CLEANING SEAT PAD AND HEADREST PAD

- To remove seat pad first detach shoulder straps (see “Harness -

Changing Length, Shoulder Harness Slots and Removal” section).

- To remove headrest pad, slide pad off sides of headrest.

- Wash according to the instructions on the back of the seat pad or

headrest pad.

CAUTION: When replacing the seat pad always check that the

shoulder straps are correctly secured to the metal harness plate. See

“To Reattach” in “Harness - Changing Length, Shoulder Harness Slots

and Removal” section.

CLEANING HARNESS

- Surface wash with mild soap and damp cloth.

If harness straps are frayed or heavily soiled, they MUST be replaced.

CLEANING SHELL

- Wipe with a mild solution of soap and water. Avoid wetting labels.

Never use “household detergents”: they can weaken plastic.

CLEANING BUCKLE

- Rinse buckle with warm water. DO NOT use household detergents.

Never lubricate buckle.

Section 16 - Care and Cleaning

CCS0262D 090209.qxd:CCS0262D 090209 9/2/09 1:14 PM Page 75

Summary of Contents for Shuttle 33 8097 Series

















































































Search results

Summary of Contents for Shuttle 33 8097 Series

Reviews:

Related manuals for Shuttle 33 8097 Series

Brands by name

Popular brands

Combi Shuttle 33 8097 Series, Instruction Manual

Search results

Summary of Contents for Shuttle 33 8097 Series

Reviews:

Related manuals for Shuttle 33 8097 Series

Brands by name

Popular brands