ComAp Inteli Mains NT BaseBox, Communications Manual

Page: 7 / 152

IGS-NT Communication Guide
7
1 Document information
1.1 Clarification of notation 7
1.2 About this guide 7
1.3 Legal notice 7
1.4 Document history 9
1.5 Definition of terms 9
1.1 Clarification of notation
Note: This type of paragraph calls readers attention to a notice or related theme.
IMPORTANT: This type of paragraph highlights a procedure, adjustment etc., which can cause a
damage or improper function of the equipment if not performed correctly and may not be clear at
first sight.
Example: This type of paragraph contains information that is used to illustrate how a specific function
works.
1.2 About this guide
There are following types of communication between controller(s) and superior system in the controller:
Local (on site) communication
via ComAp software
via MODBUS (MODBUS RTU or MODBUS TCP)
Remote communication
via Ethernet
via Internet (AirGate)
via MODEM
These types of connections are available via RS232, RS485, USB, ETHERNET communication ports.
1.3 Legal notice
This End User's Guide/Manual as part of the Documentation is an inseparable part of ComAp’s Product and
may be used exclusively according to the conditions defined in the “END USER or Distributor LICENSE
AGREEMENT CONDITIONS – COMAP CONTROL SYSTEMS SOFTWARE” (License Agreement) and/or in
the “ComAp a.s. Global terms and conditions for sale of Products and provision of Services” (Terms) and/or in
the “Standardní podmínky projektů komplexního řešení ke smlouvě o dílo, Standard Conditions for Supply of
Complete Solutions” (Conditions) as applicable.
ComAp’s License Agreement is governed by the Czech Civil Code 89/2012 Col., by the Authorship Act
121/2000 Col., by international treaties and by other relevant legal documents regulating protection of the
intellectual properties (TRIPS).