ComAp Inteli Mains NT BaseBox, Communications Manual

Page: 151 / 152

IGS-NT Communication Guide
151
MSB1
(*)
LSB1
(*)
MSB2
(*)
LSB2
(*)
Meaning
235 0 0 8
This error is reported by iG-MU module (Modem Bridge) in the case of a
connection failure between the module and the addressed controller. The
terminal can evaluate this error as a communication timeout with the
controller.
234 0 0 8 Write cannot be performed – periphery not responding.
233 0 0 8 Write cannot be performed – setpoint nonexistent in any periphery.
232 0 0 8 Bad access code for communication from a remote terminal.
231 0 0 8
Invalid controller address: value out of range 1 to 32 or already used. This
error is a reaction on communication object. Object 24537 write.
230 0 0 8 Error in definition for communication oscilloscope objects.
229 0 0 8
Undefined action. A reaction on communication object. Object 24521
write.
228 0 0 8
Action (although defined) cannot be performed. A reaction on
communication object. Object 24521 write.
227 0 0 8 Written object value is not acceptable.
226 0 0 8 No more free slots.
225 0 0 8 No connection.
224 0 0 8 Locked, block reading is active.
223 0 0 8 Locked, commanding is active.
222 0 0 8 Locked, the history reading is active.
221 0 0 8 Locked, the programming is active.
220 0 0 8 Communication error.
219 0 0 8 Request for – data.
218 0 0 8 Request for – SMS.
217 0 0 8 Request for – email.
216 0 0 8 Request for – mobile email.
215 0 0 8 Request for - fax.
214 0 0 8 Wrong access code, the connection must be terminated.
213 0 0 8 Reserved for HW key.
212 0 0 8 Reserved for DENOX.
211 0 0 8 Unsufficient access rights.
210 0 0 8 The request can be submitted only by the administrator (User 0).
209 0 0 8 The administrator has entered a wrong user identification number.
208 0 0 8 Not possible to write, the communication object has forced value.
207 0 0 8 The administrator requests an unsupported operation.
206 0 0 8 Selected communication mode doesn’t allow required interface.
205 0 0 8 Selected interface doesn’t allow required communication mode.
204 0 0 8
HW data flow control for modem communication. Sending as answer to
request to read 24437 communication object.