Operator Displays
The Slide Gate/Auger blending system utilizes a standardized menu format. Each screen
was designed to be user-friendly and provide the operator with the necessary information to
run the blender.
Figure 33: Typical Recipe Entry Operator Screen
A typical menu is shown in the figure above. This display, which is defaulted to when the
controller is turned on, provides the operator with the following information and options:
•
The ability to change Recipe Values
•
Accept a newly entered Recipe
•
Start or Stop the blender
•
Access to the Recipe Book
•
Access to the Clean-out Screen
•
Access to the Inventory Screen
•
Access to the Controller Setup Screen
The menu tree shows the structure for a standard Slide Gate/Auger blender.
When the unit is initially installed the Manual Control menu will be used. This screen is
primarily used for trouble shooting the blender. All outputs can be controlled manually and
all digital inputs from the proximity switches can be viewed. Pressing the “Manual Control”
key when in the “Setup” menu accesses this screen. To gain access to the “Setup” menu, a
password will be requested.
Figure 34: Typical Manual Control Operator Screen
BF1-615.3
Chapter 4: 3BOperation
47 of 101
Summary of Contents for 882.00273.00
Page 22: ...Figure 11 Typical Operator Screens BF1 615 3 Chapter 2 1BFunctional Description 22 of 101...
Page 23: ...Figure 12 Typical Setup Screens BF1 615 3 Chapter 2 1BFunctional Description 23 of 101...
Page 24: ...BF1 615 3 Chapter 2 1BFunctional Description 24 of 101...
Page 75: ...Mixer Sub Assembly BF1 615 3 Chapter 7 6BAppendix 75 of 101...
