Page
50
of
73
VastraJet K2
9. SWITCH OFF PROCEDURE
Note:
The machine main power must be
“
ON
”
.
Follow these steps to learn the switch off procedure:
Step 1:
Perform the Nozzle Test to check print head nozzles status.
Step 2:
Up the press roller (using the back HMI) and remove the fabric.
Step 3:
Clean the Capping Station area and check the water level in the Capping tray.
Step 4:
Click the
Auto Capping
icon to engage capping station with the head plate using the Printer Manager, as
shown below:
Fig 65: Displaying the Auto Capping Option
Note:
Never move the carriage manually over elevated capping station.
Step 5:
Close the printer manager software.
Step 6:
Turn OFF the Print Engine from the front HMI using the SERVICE screen.
Step 7:
Turn OFF the printer using the Machine Power button or Emergency button.
Step 8:
Insert the bracket to hold the press roller in the UP position, as shown below:
Fig 66: Holding the Press Roller in the Up Position
Step 9:
Cover the printer to avoid dust particles on the machine parts.
Now, the printer is switch off.
