Page
11
of
73
VastraJet K2
Step 10:
Check the Waste Ink Bottle and empty it, if full.
Step 11:
Perform purging using the front HMI and wiping process (Refer to the Head Wiping Section).
Step 12
: Check print head nozzles status on the paper by issuing the Nozzle Test command. If nozzle test result is not
OK or nozzles are blocked, perform the head wiping and purging.
Step 13:
Go Online from the front HMI to enable the ONLINE mode.
Fig 10: Enabling the Machine ONLINE Mode
Step 14:
After enabling the ONLINE mode, turn on print heater and washing system to activate the glue using the
WASHING SYSTEM
screen as shown below:
Fig 11: Enabling the Print Dryer